BREMBO DOT4 PREMIUM BRAKE FLUID
suitable for all vehicles with ABS. Compared to current regulatory standards, it has a higher boiling point and lower viscosity. recommended for vehicles with latest-generation electronic control systems for braking and stability (ABS, ESP, ASR, TCS, EBD etc.), it features very low viscosity.
with characteristics such as resistance to high temperatures and its superior viscosity value, it is recommended for high performance vehicles.Brembo Premium Brake Fluid LHM PSA: recommended for vehicles bound to use products with PSA B71 2710 specification. Unlike its predecessors, it is a mineral-based hydraulic liquid specifically tailored for brake circuits, but also for suspension and steering systems.BREMBO DOT4 PREMIUM BRAKE
BREMBO DOT4 PREMIUM BRAKE
Discs, calipers, pads and master cylinders are the four cardinal components of each braking system. However they cannot play together without the fulcrum of the entire system: the brake fluid.
Typically, its level is checked and toped up only when it has fallen below the minimum mark. However this does not avoid the risk of “vapour lock”, the formation of vapour bubbles when a brake fluid boils. This problem occurs when the brake fluid absorbs moisture over time, as a result of the porosity of the brake circuit tubes, thereby drastically reducing its boiling point.
“Vapour lock” means, the pedal goes all the way down. As the fluid cannot pass on the pressure, the vapour bubble is just simply compressed in the hydraulic circuit. It is also called a “spongy pedal” with the result of less efficient braking. To avoid this, it is essential to replace the brake fluid within the time limit recommended by the vehicle manufacturer.BREMBO DOT4 PREMIUM BRAKE
However, not all brake fluids have the same properties. With its Premium Brake Fluid range, Brembo is not content to simply meet regulatory standards but rather introduces new concepts.
**আপনার অর্ডারটি কনফার্ম হওয়ার পর আমাদের প্রতিনিধি আপনার সাথে যোগাযোগ করবে।**